What are the characteristics of a cam indexer? What are the steps in its installation process? We have previously provided a brief introduction to this question, but we have found that many customers still do not understand. Today, we will take this opportunity to explain it in detail. We hope this will be helpful to those concerned.

First, let's look at the characteristics of a cam indexer. When companies choose a product, they first look at its characteristics to see if it meets their needs. Therefore, understanding its characteristics is particularly important. The cam indexer has a relatively simple structure, mainly consisting of a three-dimensional cam and an indexing disc. Its transmission is relatively smooth, the motion characteristics of the three-dimensional cam curve are good, the transmission is smooth and continuous, the vibration produced is small, and therefore the noise is low. Moreover, the three-dimensional cam and indexing wheel of the cam indexer are meshing transmissions without clearance. Because of its small impact vibration, it can achieve high speed, reaching 900rPm. Whether in the indexing zone or the stationary zone, its movements are very precise and accurately positioned. No other locking components are needed. Any specific static-dynamic ratio and indexing number can be achieved. Furthermore, the cam indexer has high output indexing accuracy and a long lifespan; the standard lifespan of a cam indexer is typically 12000 hours. This saves companies costs and indirectly creates benefits.

When a company receives a cam indexer, the first step is to install it according to the instructions. Only with correct installation can the machine perform its function. The installation of the cam indexer body must be done step by step. Because the cam indexer is a high-precision indexing mechanism obtained through precision machining and correct assembly and adjustment, users cannot adjust, disassemble, or assemble it without authorization before use. Then, confirm whether the mounting surface of the cam indexer is damaged. If there is damage, use an oilstone to repair it. This problem is sometimes unavoidable during transportation, so be prepared. Next, locate the positive input and output shafts of the machine, then add positioning pins, and tighten the screws evenly. Because the machine is subjected to pulsating load torque, the installation must be very firm. In other words, when people use a cam indexer, the movement trajectory of the cam driver is actually formed by high-precision grinding of a five-axis CNC grinding machine. Only in this way can smooth operation be ensured. The cam is usually made of alloy steel. Therefore, the high-speed operation has a low friction coefficient and a long service life. It can work continuously for about 12000 hours and is not easily damaged.